Page 150 - Veterinary Instrumentation Overseas
P. 150

                 515JoDinetnStaulrEgqeuryipment & Instrumentation www.vetinst.com
Forkless TTA Plates
TTA Cuttable Cages
Cuttable cages can be trimmed in 3mm increments, to cover a larger range of patients with a reduced inventory.
Also available as a set of cages (one of each size) with a free cutter.
TTA CUTTABLE CAGES
    An alternative to the traditional forked plates. Secured using 2.4mm screws in the tibial crest, after the osteotomy and advancement have been made. Distal screws are secured using screws as appropriate.The rest of the technique is as per standard TTA.
Advantages:
• Position of the plate on the tibial crest and tibial diaphysis not fixed until after the osteotomy and advancement have been made – avoids difficult diaphyseal screw placement where the distal screws are too caudal on the tibia. Problem in small breeds and if this is missed in planning.
• Tibial crest screws can be angled if needed
• Screw length of tibial crest screws can be individual selected for better fit
• Less screw holes in tibial crest than fork holes, helping reduce risk of tibial crest fracture
A starter set of forkless plates (one of each) is available at a good discount over component costs.
FORKLESS TTA PLATES
 TTAX42 TTAX52 TTAX65 TTAX78 TTAX91 TTAX104 TTAXSET
Forkless TTA Plate (same length as TTAP3) 2.4+2.7 screw Forkless TTA Plate (same length as TTAP4) 2.4+2.7 screw Forkless TTA Plate (same length as TTAP5) 2.7 screw Forkless TTA Plate (same length as TTAP6) 2.7+3.5 screw Forkless TTA Plate (same length as TTAP7) 3.5 screw Forkless TTA Plate (same length as TTAP8) 3.5 screw Forkless TTA Plate Set - one of each size
TTACUT316 TTACUT4518 TTACUT622 TTACUT7522 TTACUT926 TTACUT10526 TTACUT1228 TTACUT13528 TTACUT1532 TTACUT1
Cuttable Cage 3 x 16mm
Cuttable Cage 4.5 x 18mm
Cuttable Cage 6 x 22mm
Cuttable Cage 7.5 x 22mm
Cuttable Cage 9 x 26mm
Cuttable Cage 10.5 x 26mm
Cuttable Cage 12 x 28mm
Cuttable Cage 13.5 x 28mm
Cuttable Cage 15 x 32mm
Cuttable Cage Set (9) with FREE Cage Cutters
   Forkless Plate Forceps
TTA Cuttable Cage Cutters
TTA cage cutters, which have narrow jaws designed to fit between the fins of cuttable cages.These cutters are only for TTA cages – not suitable for other implants due to the specially designed slim jaws.
TTA CUTTABLE CAGE CUTTERS
TTACACUT TTA Cuttable Cage Cutter
    Variant of the plate holding drill guide forceps design developed for thin TTA plates. Hold the plate in position allowing the pilot hole to be drilled through the guide in the correct position, even after the osteotomy has been made.
FORKLESS TTA PLATE FORCEPS
TTAXFCP Forkless TTA Plate Forceps (145mm)
 146
TTA Washers
 Stackable titanium washers. Permit adjustments in 1mm increments.
TTA WASHERS - TITANIUM
PW24TI 2.4mm TTA Washer - Titanium
 


























































   148   149   150   151   152